Dotyczy: Transmission 712.61 in model 384 Transmission 712.61 in model 979 Transmission 712.622/631 in model 368 Transmission 712.623/632 in model 368, 382, 384, 693, 694, 695 Transmission 712.63 in model 958 Transmission 712.631 in model 384.334, 685.282/284/289/290 Transmission 715.05 in model 382 Transmission 715.05 in model 384 Transmission 715.05 in model 693 Transmission 715.05 in model 694
Niedostępne w języku „pl”; wyświetlono w języku Angielski.
Dotyczy też silników/skrzyń biegów: 712 61*, 712 622, 712 623, 712 63*, 712 631, 712 632, 715 05*
AR26.40-B-2470-01A
Detach front section of transmission housing
Transmission
712.61 in model 384
Transmission
712.61 in model 979
Transmission
712.622/631 in model 368
Transmission
712.623/632 in model 368, 382, 384, 693, 694, 695
Transmission
712.63 in model 958
Transmission
712.631 in model 384.334, 685.282/284/289/290
Transmission
715.05 in model 382
Transmission
715.05 in model 384
Transmission
715.05 in model 693
Transmission
715.05 in model 694
715 589 01 35 00
Press-off tool
715 589 02 33 14
Hydraulic spindle
652 589 00 33 00
Pulling device
The figure shows a 715.054 gearbox without hydraulic central actuation device
1
Assemble the removal device under pressure (2) at the front part of the gearbox (1).
2
Separate under pressure the front part of the gearbox (1) from the counter shaft. Support the hydraulic spindle (3) with an appropriate separating bushing (4). Unfasten the front part of the gearbox (1) by applying light blows with a plastic hammer on the guide pin.
