ar2520b018101a
Detach/attach hydraulic central clutch release bearing
Typ ar · temat 25.20 · wersja 0105 · 2019-09-19
Dotyczy: Model 958.0/1 with engine 904.9, 906.9, 924.9, 926.9 Model 958.2 with engine 906.9, 926.9
Niedostępne w języku „pl”; wyświetlono w języku Angielski.
Umiejscowienie
Grupa funkcyjna 2 Podwozie › 25 Sprzęgło › 25.20 Mechanizm wyłączania sprzęgła — Seria 904 (modele 9**) · Seria 906 (modele 9**) · Seria 958 (modele 0**, 1**, 2**)
EinPAS 17 Zespół przeniesienia napędu/ oś › 17.15 Sprzęgło › 17.15.5 Uruchamianie sprzęgła — Seria 904 (modele 9**) · Seria 906 (modele 9**) · Seria 958 (modele 0**, 1**, 2**)
Dotyczy też silników/skrzyń biegów: 924 9**, 926 9**
AR25.20-B-0181-01A
| Detach/attach hydraulic central clutch release bearing
|
|
|
Model
| 958.0/1 with engine 904.9, 906.9, 924.9, 926.9
|
Model
| 958.2 with engine 906.9, 926.9
|
Number
| Designation
|
|
| Type 958.0/1 with engine 904.9, 906.9, 924.9, 926.9
| Type 934.241/251, 938.14 with engine 460.984 - 934.241/251, 958.4 with engine 457.9 - Type 958.2 with engine 906.9, 926.9
|
BA25.20-B-1004-01L
| Connection/ventilation nozzle in the central clutch device
| M18
| Nm
| 50
| 50
|
|
|
| M20
| Nm
| 80
| 80
|
Number
| Designation
|
| Type 958.0/1 with engine 904.9, 906.9, 924.9, 926.9
| Type 934.241/251, 938.14 with engine 460.984 - 934.241/251, 958.4 with engine 457.9 - Type 958.2 with engine 906.9, 926.9
|
BA25.20-B-1005-01L
| Central clutch device on the gearbox
| Nm
| 25
| 25
|
Remove
1
| Loosen the connecting nozzle (3) and the vent nozzle (4).
|
2
| Remove the wiring connector (6) of the clutch stroke sensor (B2) on the transmission housing.
|
|
| Only on vehicles with automatic control or Telligent maintenance system.
|
3
| Loosen the screws (1) and remove the central drive device (2).
|
Install
4
| Place the central drive device (2) and secure it using screws (1).
|
5
| Install the wiring connector (6) of the clutch stroke sensor (B2) on the transmission housing.
|
|
| Only on vehicles with automatic control or Telligent maintenance system.
|
6
| Replace the gaskets (5) and secure the connection nozzle (3) and vent nozzle (4).
|
