ar2519d0150ts

Remove/install clutch pedal front end position push button switch

Typ ar · temat 25.19 · wersja 0100 · 2018-03-15

Dotyczy: Model 907, 910

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 2 Podwozie › 25 Sprzęgło › 25.19 Sprzęgło elektryczne — Seria 907 · Seria 910

EinPAS 17 Zespół przeniesienia napędu/ oś › 17.15 Sprzęgło › 17.15.12 Czujnik/ przełącznik/ wiązka przewodów — Seria 907 · Seria 910

AR25.19-D-0150TS

Remove/install clutch pedal front end position push button switch

07.03.2018

Model

907, 910

Remove/install clutch pedal front end position push button switch

D25.19-0001-08

1

Electrical connector

2

Lock

3

Pushbutton

Warning

Risk of injury. Moving parts can pinch, crush or, in extreme cases even sever extremities.

No parts of the body or limbs should be within the operating area of mechanical components when moving components.

AS00.00-Z-0009-01A

Caution

Risk of injury caused by scraping or cutting body parts on sharp vehicle parts

Always wear protective gloves when working on or near sharp and non-deburred vehicle parts.
Deburr repair panels.

AS00.00-Z-0017-01A

Topical note

Notes on carrying out repair work in the vehicle interior

AH68.00-N-0001-01S

Remove/install

1

Switch off ignition

2

Release and disconnect electrical connection (1)

3

Remove push button switch (3)

To do so, release lock (2), turn push button switch (3) counterclockwise through approx. 45° and pull out of pedal bracket.

4

Install in the reverse order

Powiązane dokumenty