Removing and installing the rear and front engine support

AR22.10-S-5564B

14.6.95

ENGINE 601 in MODEL 638

S22.10-2001-06

1 Front engine support

2 Screws

3 Liquid tank (Code H06)

4 Screws (code H06)

5 Screw

6 Self-locking nut

7 Front engine bearing

8 Rear engine support

9 Screw

10 Self-locking nut

11 Rear engine bearing

12 Screws

13 Heat deflector plate

14 Screw

 	Removing and installing
1	Remove the lower insulation coating		AR94.30-S-5300A
2	Raise the engine	 Raise the engine until the engine bearings and supports are released from the load of the engine weight	AR22.10-S-1260-01B
3	Remove the tank (3) from the accessory-holder with the coolant pipes and separate it.	with air conditioning (Code H06)	AR83.30-S-6520A
4	Unscrew the screw (5) of the front engine support (1) from the engine bearing (7)	  Replace the self-locking nut (6)	*BA22.10-N-1002-01A
5	Unscrew the screws (2) of the front engine support (1) from the engine block	  4 screws	*BA22.10-N-1001-01A
6	Withdraw the front engine support (1)
7	Unhook the cable-holder (arrow) corresponding to the generator set of cables.
8	Unscrew screw (9) of the rear engine support in the engine bearing (11)	  Replace the self-locking nut (10)	*BA22.10-N-1002-01A
9	Unscrew screw (14)
10	Unscrew screws (12) of the rear engine support (8) from the engine block	  4 screws	*BA22.10-N-1001-01A
11	Withdraw the rear engine support (8) with the deflector plate (13)
12	Installation in reverse order

 Engine support, bearing

Code	Name			Engine 601.942 601.970


BA22.10-N-1001-01A	Engine support in engine block	M810.9	Nm	32
BA22.10-N-1002-01A	Engine support to front engine mount		Nm	58