P22.10-2193-07
1 Windshield washer reservoir filler neck
2 Bracket
6 Coolant pipe
7 Engine supports
3 Bolts
4 Nut
5 Nuts
| Remove/install | ||
1 | Remove windshield washer reservoir filler neck (1) with mount (2) | Installation: Replace the sealing ring of the filler neck (1). | |
2 | Remove bolts (3) | ||
3 | Use a suitable jack to support the engine | Use a suitable support of wood or rubber to prevent risk of damage to the Motors. Ensure that the jack is securely positioned to prevent it from slipping. | |
4 | Unscrew nut (4) | Replace self-locking nut (4). | |
| |||
5 | Push coolant pipe (6) to the side and unscrew nuts (5) | Replace self-locking nuts (5). | |
| |||
6 | Take out engine support (7) | ||
7 | Install in the reverse order |
Engine mounts, engine supports