Remove/install lower engine stabilizer mount

AR22.10-P-1155MFC

Remove/install lower engine stabilizer mount

21.02.2020

Engine

260, 282 in model 118, 177, 247

Modification notes

28.10.2019

Document completely revised.

Shown on engine 282 except code ME08 (hybrid drive 75 – 84 KW variant (INCLUDING PLUGIN))

1

Screw

2

Bolts

3

Lower engine stabilizer mount

Shown on engine 260

1

Screw

4

Shielding

2

Bolts

5

Bolts

3

Lower engine stabilizer mount

 Danger

Risk of death caused by vehicle slipping or toppling off of the lifting platform.

Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by the vehicle manufacturer.

AS00.00-Z-0010-01A

 Danger

Risk of death when working on component parts and systems with U >= 30 V alternating voltage (AC) or U >= 60 V direct voltage (DC)

Do not touch damaged or defective live component parts and lines or non-insulated electrical connections and lines.Engine 282 in model 118, 177, 247
with code ME08 (Hybrid drive 75-84 kW VARIANT (INCLUDING PLUGIN))

AS00.00-Z-0035-01A

 Warning

Risk of injury. Skin or eye injuries may result when handling hot or glowing objects.

Wear protective gloves, protective clothing and safety glasses, if necessary.

AS00.00-Z-0002-01A

 Caution

Risk of injury caused by scraping or cutting body parts on sharp vehicle parts

Always wear protective gloves when working on or near sharp and non-deburred vehicle parts.
Deburr repair panels.

AS00.00-Z-0017-01A

Topical note

General information on vehicles with high-voltage on-board electrical system and/or lithium-ion battery and/or gaseous-fuel drive system as well as personal protective equipment

Engine 282 in model 118, 177, 247
with code ME08 (Hybrid drive 75-84 kW VARIANT (INCLUDING PLUGIN))

AH00.00-Z-0300-01A

Topical note

Notes on self-locking nuts and bolts

AH00.00-N-0001-01A

 

Remove/install

1

Remove voltage of high-voltage on-board electrical system.

Engine 282 in model 118, 177, 247
with code ME08 (Hybrid drive 75-84 kW VARIANT (INCLUDING PLUGIN))

AR47.70-P-1000MFH

2

Remove bottom engine compartment paneling.

AR61.20-P-1105MFA

3

Remove screws (5) and remove shielding (4).

Engine 260 in model 118, 177, 247

4

Remove screw (1).

 Screw, engine carrier engine stabilizer mount at bottom to front axle carrier

*BA22.10-P-1008-03P

5

Remove screws (2) and remove bottom engine stabilizer mount (3).

 Screw, engine stabilizer mount at bottom to engine carrier

*BA22.10-P-1009-03P

6

Check elastomer bearings of the bottom engine stabilizer mount (3) for damage and wear.

If damage or wear can be detected,



Replace lower engine stabilizer mount (3).

7

Install in the reverse order.

 Engine mount, engine support (engine side)

Number

Designation

Model 118, 177, 247

BA22.10-P-1008-03P

Screw, engine carrier engine stabilizer mount at bottom to front axle carrier

Nm

106

 Engine mount, engine support (engine side)

Number

Designation

Model 118, 177, 247

BA22.10-P-1009-03P

Screw, engine stabilizer mount at bottom to engine carrier

Nm

106