Remove/install upper engine stabilizer mount

AR22.10-P-1145MFC

Remove/install upper engine stabilizer mount

15.10.2019

Engine

260 in model 118, 177, 247

Modification notes

Shown on engine without code M016 (performance-enhanced engine)

1

Screw

5

Coolant expansion reservoir

2

Screw

6

Electrical connector

3

Screw

7

Coolant hose

4

Upper engine stabilizer mount

 Warning

Risk of injury. Skin or eye injuries may result when handling hot or glowing objects.

Wear protective gloves, protective clothing and safety glasses, if necessary.

AS00.00-Z-0002-01A

 Caution

Risk of injury caused by scraping or cutting body parts on sharp vehicle parts

Always wear protective gloves when working on or near sharp and non-deburred vehicle parts.
Deburr repair panels.

AS00.00-Z-0017-01A

Topical note

Notes on self-locking nuts and bolts

AH00.00-N-0001-01A

 

Remove/install

1

Unclip coolant hose (7) at right engine mount.

 Dismantling tool

*000589956300

2

Release and disconnect electrical connector (6) and remove electric line from the coolant expansion reservoir (5).

 Dismantling tool

*000589956300

3

Place coolant expansion reservoir (5) to one side with connected coolant lines.

AR20.30-P-4949MFD

4

Remove screw (1) of refrigerant line at right engine mount and slightly press refrigerant line to side.

 Screw, refrigerant line to engine mount/body

*BA83.30-P-1004-01T

5

Remove screw (2) of upper engine stabilizer mount (4) at right engine mount.

 Screw, engine stabilizer mount at top to engine mount

*BA22.10-P-1006-03P

6

Remove screw (3) of upper engine stabilizer mount (4) at mount at suspension strut tower.

 Screw, engine mount engine stabilizer mount at top to body

*BA22.10-P-1007-03P

7

Remove upper engine stabilizer mount (4).

 Installation: Ensure guide pin (arrow) is correctly seated at right engine mount in elongated hole of upper engine stabilizer mount (4).



Check

8

Check right engine mount.

If damage or wear to right engine mount is recognizable



Replace right engine mount.

AR22.10-P-1102MFD

9

Install in the reverse order

 Engine mount, engine support (engine side)

Number

Designation

Model 118, 177, 247

BA22.10-P-1006-03P

Screw, engine stabilizer mount at top to engine mount

Nm

130

 Engine mount, engine support (engine side)

Number

Designation

Model 118, 177, 247

BA22.10-P-1007-03P

Screw, engine mount engine stabilizer mount at top to body

Nm

106

 Air conditioning

Number

Designation

Model 118

Model 177

BA83.30-P-1004-01T

Screw, refrigerant line to engine mount/body

M6

Nm

8

8

 Air conditioning

Number

Designation

Model 247

BA83.30-P-1004-01T

Screw, refrigerant line to engine mount/body

M6

Nm

8