P22.10-2300-09
1 Engine mount
2 Brake booster vacuum line
3 Fuel lines holder
7 Bolts
8 Screw
9 Frame-type integral support
4 Clamp
5 Fuel return line
6 Pipe connection
| Remove/install | ||
Danger! | Risk of explosion caused by fuel igniting, risk of poisoning caused by inhaling and swallowing fuel and risk of injury to eyes and skin caused by contact with fuel | No fire, sparks, open flames or smoking. Wear protective clothing when handling fuel. | |
1 | Remove interior flap above engine | ||
2 | Expose brake booster vacuum line (2) on fuel lines holder (3) | ||
3 | Release clamp (4) and detach fuel return line (5) from line connection (6) | Close off fuel return line (5) and line connection (6) using suitable stop plug. | |
Installation: Replace clamp (4). | |||
4 | Support engine on oil pan using a hand-operated hydraulic floor jack | Use a suitable protective underlay in order to avoid damage to the oil pan. | |
Floor jack | |||
5 | Remove bolts (7) for engine mount (1) to the intermediate plate on cylinder head and rear bolt (8) for engine mount (1) on frame-type integral support (9) from above | | |
| |||
6 | Remove fender liner in right rear fender | ||
7 | Remove front bolt (8) for engine mount (1) on frame-type integral support (9) and remove engine mount (1) | | |
8 | Install in the reverse order |
Engine mounts, engine supports
Powiązane dokumenty
- ar8810p1400mcc
- ar8840p110003mcc
- as4700z000101a Niebezpieczeństwo wybuchu wskutek zapalenia, niebezpieczeństwo zatrucia wskutek wdychania i połknięcia paliwa oraz niebezpieczeństwo obrażeń wskutek kontaktu skóry i oczu z paliwem.