P22.10-2204-07
1 Clip
2 Windshield washer reservoir filler neck
5 Nuts
3 Engine mount
4 Longitudinal member
| Remove/install | ||
1 | Open engine hood | ||
2 | Remove clip (1) and remove windshield washer reservoir (2) filler neck from windshield washer reservoir | ||
3 | Use a suitable jack to support the engine | Use a suitable wooden or rubber support to prevent damage to the oil pan. Ensure that jack is securely positioned to prevent it from slipping. | |
4 | Remove bolts and nuts for engine mount (3) on longitudinal member (4) | Replace self-locking bolts and nuts. | |
| |||
| |||
5 | Unscrew nuts (5). | Replace self-locking nuts (5). | |
| |||
6 | Take out engine mount (3) | ||
7 | Install in the reverse order |
Engine mounts, engine supports