ar2210d1200na

Remove/install engine support

Typ ar · temat 22.10 · wersja 0103 · 2006-07-25

Dotyczy: ENGINE 612.981 in MODEL WD1, WD2, WD3, WD6, WD7, XD1, XD2, XD3, XD4, XD5, XD6, XD7, YD1, YD2, YD3, YD4, YD5, YD6, YD7 ENGINE 647.981 in MODEL WD1, WD2, WD3, WD6, WD7, XD1, XD2, XD3, XD4, XD5, XD6, XD7, YD1, YD2, YD3, YD4, YD5, YD6, YD7 ENGINE 612.981 in MODEL 903.61 /66 /67, 904.61 /66 with CODE (ZU7) National version for Canada ENGINE 612.981 in MODEL 903.61 /66 /67, 904.61 /66 with CODE (ZU8) National version for USA ENGINE 612.981 in MODEL 903.61 /62 /66 /67, 904.61 /62 /66 with CODE (ZU9) Nation

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 1 Silnik › 22 Zawieszenie zespołu › 22.10 Łożysko zespołu, wspornik zespołu — Seria 647 (modele 981) · Seria 903 (modele 61*, 62*, 66*, 67*) · Seria 904 (modele 61*, 62*, 66*)

EinPAS 15 Silnik › 15.15 Silnik spalinowy kompletny/obudowa silnika/mechanizm korbowy › 15.15.20 Zawieszenie silnika — Seria 647 (modele 981) · Seria 903 (modele 61*, 62*, 66*, 67*) · Seria 904 (modele 61*, 62*, 66*)

Dotyczy też silników/skrzyń biegów: 612 981

AR22.10-D-1200NA

Remove/install engine support

16.1.01

ENGINE 612.981 in MODEL WD1, WD2, WD3, WD6, WD7, XD1, XD2, XD3, XD4, XD5, XD6, XD7, YD1, YD2, YD3, YD4, YD5, YD6, YD7

ENGINE 647.981 in MODEL WD1, WD2, WD3, WD6, WD7, XD1, XD2, XD3, XD4, XD5, XD6, XD7, YD1, YD2, YD3, YD4, YD5, YD6, YD7

ENGINE 612.981 in MODEL 903.61 /66 /67, 904.61 /66 with CODE (ZU7) National version for Canada

ENGINE 612.981 in MODEL 903.61 /66 /67, 904.61 /66 with CODE (ZU8) National version for USA

ENGINE 612.981 in MODEL 903.61 /62 /66 /67, 904.61 /62 /66 with CODE (ZU9) National version for Mexico

ENGINE 647.981 in MODEL 903.61 /66 /67, 904.61 /66 with CODE (ZU7) National version for Canada

ENGINE 647.981 in MODEL 903.61 /66 /67, 904.61 /66 with CODE (ZU8) National version for USA

ENGINE 647.981 in MODEL 903.61 /62 /66 /67, 904.61 /62 /66 with CODE (ZU9) National version for Mexico

Remove/install engine support

D22.10-1107-08

Shown on engine 612.981

1 Left engine support

2 Bolts

3 Screw

7 Right engine support

8 Ground cable

9 Engine lifting device

10 Fuel filter

4 Washer

5 Bracket

6 Engine mount

Remove/Install

1

Remove heat shield above turbocharger

2

Raise engine

Raise engine until the engine mounts no longer bear the weight of the engine.
Observe bracket (5) and ground line (8) at left engine mount (6).

AR22.10-D-1260-01NA

Installation: When lowering the engine, gently place the engine on the engine mount (6).
Insert bolts (3) and tighten by hand.
Then, lower engine fully and tighten bolts (3) to final torque.

*BA22.10-N-1002-01L

*WE58.40-Z-1007-11A

3

Detach fuel filter (10) at left engine support (1) and place to the side with fuel lines connected

4

Take out screws (2) and remove engine support (1) on left and right (7)

*BA22.10-N-1003-01L

5

Install in the reverse order

Engine mounts, engine supports

Number

Designation

Engine 612.981

Engine 647.981

BA22.10-N-1002-01L

Bolt of engine support to front engine mount

Nm

83

83

BA22.10-N-1003-01L

Bolt of engine support to crankcase

Nm

20

20

Workshop equipment

WE58.40-Z-1007-11A

Engine lifting fixture

Powiązane dokumenty