ar2040p5050mrm

Remove/install fan unit

Typ ar · temat 20.40 · wersja 0100 · 2020-03-30

Dotyczy: Engine 274.9 in model 167

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 1 Silnik › 20 Chłodzenie silnika › 20.40 Wentylator, sprzęgło wentylatora — Seria 167

EinPAS 15 Silnik › 15.25 Układ chłodzenia silnika › 15.25.45 Wentylator/sprzęgło wentylatora/napęd wentylatora — Seria 167

Dotyczy też silników/skrzyń biegów: 274 9**

AR20.40-P-5050MRM

Remove/install fan unit

05.03.2020

Engine

274.9 in model 167

Remove/install fan unit

P20.40-A026-09

1

Automatic transmission oil cooler

3

Coolant hose

2

Fan unit

4

Electrical connector

Topical note

Information on preventing damage to electronic components due to electrostatic discharge

AH54.00-P-0001-01A

Remove/install

1

Switch off ignition and store transmitter key outside of transmitter range (min. 2 m).

2

Remove engine air intake duct upstream of air filter.

3

Remove automatic transmission oil cooler (1) from the fan unit (2) and fasten free of tension outside of the working area.

AR27.55-P-1000MRM

Do not remove coolant hoses and oil lines from the oil cooler.

4

Unclip coolant hose (3) from the fan unit (2).

5

Release and disconnect electrical connector (4) of the fan unit (2) and unclip electric line from the fan unit (2).

6

Remove fan unit (2) from the radiator mounts (arrows A) and remove upward.


Carefully remove fan unit (2) and insert.
Otherwise, coolant hoses may be damaged.

Installation: Ensure that the fan unit (2) is seated correctly in the in radiator mounts (arrows B).

7

Install in the reverse order.

Powiązane dokumenty