Remove/install engine oil fill level sensor

AR18.40-S-5116E

Remove/install engine oil fill level sensor

23.11.2018

Engine

654.9 in model 447

1

Engine oil fill level sensor

3

Screws/bolts

2

Electrical connector

4

Sealing ring

 Warning

Risk of injury. Skin or eye injuries may result when handling hot or glowing objects.

Wear protective gloves, protective clothing and safety glasses, if necessary.

AS00.00-Z-0002-01A

 Caution

Risk of injury to skin and eyes due to handling of engine oil. Risk of poisoning caused by swallowing engine oil

Wear protective gloves, protective clothing and safety glasses.
Do not fill engine oil into beverage containers.

AS18.00-Z-0001-01A

Topical note

Information on preventing damage to electronic components due to electrostatic discharge

AH54.00-P-0001-01A

Topical note

Notes on avoiding damage through contamination and foreign objects

AH00.00-P-5000-01A

 

Remove/install

1

Remove lower engine compartment lining

AR61.20-S-1105E

 Installation: Only install engine compartment paneling below after leak test.

2

Drain engine oil.



AP18.00-S-0101EG

3

Disconnect electrical connection (2).

4

Remove screws/bolts (3).

 Screw/bolt, fill level sensor to oil pan bottom section

*BA18.40-N-1001-03EA

5

Remove engine oil fill level sensor (1).

 Installation: Replace compression ring (4).

 Assembly tool

*000589936300

6

Install in the reverse order

 Warning

Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running.

Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts.

AS00.00-Z-0005-01A

7

Carry out engine test run and check engine for proper leaktightness and leaktightness.

 Fill level sensor

Number

Designation

Engine 654.9 in model 447

BA18.40-N-1001-03EA

Screw/bolt, fill level sensor to oil pan bottom section

Nm

8