ar1830d684002d

Disassemble, assemble oil-water heat exchanger

Typ ar · temat 18.30 · wersja 0111 · 2006-02-02

Dotyczy: ENGINE 904.904 in MODEL 670 ENGINE 904.908 /914 /923 /936 in MODEL 668, 670

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 1 Silnik › 18 Układ smarowania silnika, układ chłodzenia oleju › 18.30 Chłodzenie oleju — Seria 668 · Seria 670 · Seria 904 (modele 904, 908, 914, 923, 936)

EinPAS 15 Silnik › 15.20 Układ smarowania silnika › 15.20.31 Filtr/chłodzenie/termostat/wentylator/zbiornik — Seria 668 · Seria 670 · Seria 904 (modele 904, 908, 914, 923, 936)

AR18.30-D-6840-02D

Disassemble, assemble oil-water heat exchanger

Oil cooling system

Number

Designation

Engines
900.9, 902.9, 904.9, 906.9

BA18.30-N-1002-01C

Bolt, housing cover to oil-water heat exchanger

Nm

25

Disassemble, assemble oil-water heat exchanger

D18.30-0051-01

1 Unscrew bolt (1.1) at oil-water heat exchanger and take housing cover (1.2) off the heat exchanger (1.3).

Installation: When tightening the bolt (1.1), ensure that the housing cover (1.2) and the gasket (1.4) do not shift.
If possible, do not tighten bolt (1.1) fully until after fitting on the oil-water heat exchanger.

Pay attention to tightening torque.

2 Take gasket (1.4) out of the housing cover (1.2).

Installation: Replace gasket (1.4), note installation position.

3 Assemble in the reverse order.