Remove/install starter

AR15.30-D-7100TSC

Remove/install starter

10.10.2018

Engine

274 in model 907

1

Electrical line

2

Electrical line

3

Nut

4

Bolts

5

Nut

M1

Starter

 Danger

Risk of death caused by vehicle slipping or toppling off of the lifting platform.

Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by the vehicle manufacturer.

AS00.00-Z-0010-01A

 Warning

Risk of injury. Skin or eye injuries may result when handling hot or glowing objects.

Wear protective gloves, protective clothing and safety glasses, if necessary.

AS00.00-Z-0002-01A

 Caution

Risk of injury caused by scraping or cutting body parts on sharp vehicle parts

Always wear protective gloves when working on or near sharp and non-deburred vehicle parts.
Deburr repair panels.

AS00.00-Z-0017-01A

Topical note

Notes on avoiding damage through contamination and foreign objects

AH00.00-P-5000-01A

Topical note

Notes on self-locking nuts and bolts

AH00.00-N-0001-01A

 

Remove/install

1

Clamp off ground line of on-board electrical system battery (G1).

AR54.10-D-0029TS

2

Raise vehicle.

AR00.60-D-1000-04TS

Topical note

Special instructions for lifting and supporting vehicle

AH00.60-N-0100-01TS

3

Unscrew nuts (3, 5) and remove electric lines (1, 2) from starter (M1).

 Nut, line to starter

*BA15.30-N-1002-01W

4

Unscrew screw/bolts (4).

 Bolt, starter to crankcase

*BA15.30-N-1001-01W

5

Remove starter(M1) downward.



Check

6

Check pinion of the starter (M1) for damage and wear.

If the starter (M1) is reused.

If wear or damage is detected:



Replace starter (M1).

7

Check ring gear on flywheel/drive plate for wear and damage.

 Installation: Rotate engine at center Bolt, crankshaft in the direction of engine rotation.

 Socket wrench bit

*001589650900

If wear or damage is detected:



Replace flywheel/drive plate.

AR03.30-D-8003TSC

8

Install in the reverse order.

 Starter

Number

Designation

Engine 274 in model 907

BA15.30-N-1001-01W

Bolt, starter to crankcase

Nm

40

 Starter

Number

Designation

Engine 274 in model 907

BA15.30-N-1002-01W

Nut, line to starter

M6

Nm

6

M8

Nm

15