Electric vacuum pump of brake booster
P15.18-2105-06
1 Cut through cable tie (1) on engine wiring harness (2).
Connecting: Replace cable tie (1).
2 Unlock and disconnect electrical connectors (3) on CDI control unit (N3/9)
3 Disconnect electrical connector (4) and lead engine wiring harness (2) with grommet through the vehicle body opening in the engine compartment.
4 Disconnect electrical connector (5) at the glow output stage (N14/2)
5 Remove bolt (6) to vacuum pump (7) and remove electrical line (8) for engine ground.
6 Connect in reverse order.