Remove/install exhaust camshaft sensor

AR15.12-P-2147MSC

Remove/install exhaust camshaft sensor

16.11.2018

Engine

256.9 in model 167

22

Screw

B6/16

Exhaust camshaft Hall sensor

 Caution

Risk of injury to skin and eyes due to handling of engine oil. Risk of poisoning caused by swallowing engine oil

Wear protective gloves, protective clothing and safety glasses.
Do not fill engine oil into beverage containers.

AS18.00-Z-0001-01A

Topical note

Information on preventing damage to electronic components due to electrostatic discharge

AH54.00-P-0001-01A

Topical note

Notes on avoiding damage through contamination and foreign objects

AH00.00-P-5000-01A

 

Remove/install

1

Remove upper engine cover.

AR01.10-P-2405MSC

 Installation: Only install upper engine cover after the leak test.

2

Release and disconnect electrical connector on exhaust camshaft Hall sensor (B6/16).

3

Remove screw (22).

 Screw/bolt, camshaft position sensor to cylinder head cover

*BA15.10-P-1002-03I

4

Remove exhaust camshaft Hall sensor (B6/16).

5

Install in the reverse order.

6

Read out and delete fault memory.



AD00.00-P-2000-06ME

 Warning

Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running.

Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts.

AS00.00-Z-0005-01A

7

Carry out engine test run and check engine for proper leaktightness and leaktightness.

8

Install upper engine cover.

AR01.10-P-2405MSC

 Position sensor

Number

Designation

Engine 256.9

BA15.10-P-1002-03I

Screw/bolt, camshaft position sensor to cylinder head cover

Nm

8