Remove install crankshaft pulse ring

AR15.12-D-0001TSC

Remove install crankshaft pulse ring

06.03.2020

Engine

274 in model 907

2

Pulse ring

3

Crankcase

4

Oil pan top section

5

End cover

6

Radial shaft sealing ring

 Caution

Risk of injury caused by scraping or cutting body parts on sharp vehicle parts

Always wear protective gloves when working on or near sharp and non-deburred vehicle parts.
Deburr repair panels.

AS00.00-Z-0017-01A

Topical note

Notes on avoiding damage through contamination and foreign objects

AH00.00-P-5000-01A

 

Remove/install

1

Remove drive plate.

AR03.30-D-8003TSC

2

Remove pulse ring (2).


Do not use sharp-edged tools. The rubber lining of the pulse ring (2) must not get damaged.
The function of the pulse ring (2) will be impaired otherwise.


The pulse ring (2) must not come into contact with external magnetic fields.
The pulse ring (2) will otherwise be damaged.

 Installation:
The contact surfaces of the pulse ring (2) and the crankshaft flange must be absolutely clean and free of corrosion. Do not use any sharp-edged tools or abrasive paper.
The surfaces will otherwise be destroyed, rendering the crankshaft or pulse ring (2) unusable.

 Installation: The cylinder pin for the crankshaft determines the installation position of the pulse ring (2).



Check

3

Check end cover (5) and radial shaft sealing ring (6) for leaks.

If a leakage is present,



Replace end cover (5) with radial shaft sealing ring (6).

AR01.40-D-8925TSC



Clean

4

Clean crankcase (3) and oil pan top section (4) in area of end cover (5).

Assembly cleaner

*BR00.45-Z-1028-04A

5

Install in the reverse order

Repair materials

Number

Designation

Order number

BR00.45-Z-1028-04A

Assembly cleaner

A 000 986 56 01