Remove/install camshaft Hall sensor · ar1510p2000gs · Mercedes-Benz WIS

AR15.10-P-2000GS

Remove/install camshaft Hall sensor

4.12.09

ENGINES 612.965 in MODEL 463.322 /323

ENGINES 612.966 in MODEL 461.302 /332 /342 /345

P15.10-2090-06

1 Plug connection

2 Screw

B6/1 Camshaft Hall sensor

 	Remove/install
1	Open engine hood
2.1	Remove cylinder head cover trim	 Only Engine 612.965	AR01.20-P-5014-02B
			*BA01.20-P-1002-01A
			*BA01.20-P-1003-01A
3	Disconnect connector (1)
4	Remove bolt (2)		*BA15.10-P-1002-03C
5	Remove camshaft Hall sensor (B6/1)	 If O-ring is faulty, replace camshaft Hall sensor (B6/1).
6	Install in the reverse order

 Crankcase ventilation, cylinder head cover

Number	Designation		Engine 612.965	Engine 612.966


BA01.20-P-1002-01A	Bolt, trim panel of cylinder head cover to cylinder head cover	Nm	10	10
BA01.20-P-1003-01A	Bolt, charge air distribution pipe cover to charge air manifold	Nm	10	10

 Hall sensor

Number	Designation		Engines 612.963/ 965/966 990


BA15.10-P-1002-03C	Camshaft position sensor at cylinder head cover	Nm	11