Remove/install Hall sensor of camshaft

AR15.10-P-1999OID

Remove/install Hall sensor of camshaft

29.08.2018

Engine

656 in model 167

2

Electrical connector

3

Screw

B6/1

Camshaft Hall sensor

 Caution

Risk of injury to skin and eyes due to handling of engine oil. Risk of poisoning caused by swallowing engine oil

Wear protective gloves, protective clothing and safety glasses.
Do not fill engine oil into beverage containers.

AS18.00-Z-0001-01A

 Warning

Risk of injury. Skin or eye injuries may result when handling hot or glowing objects.

Wear protective gloves, protective clothing and safety glasses, if necessary.

AS00.00-Z-0002-01A

Topical note

Notes on avoiding damage through contamination and foreign objects

AH00.00-P-5000-01A

Topical note

Information on preventing damage to electronic components due to electrostatic discharge

AH54.00-P-0001-01A

 

Remove/install

1

Remove upper engine cover.

AR01.10-P-2405OID

 Installation: Only install upper engine cover after engine test run.

2

Release and disconnect electrical connector (2).

3

Remove screw (3).

 Camshaft position sensor on cylinder head cover

*BA15.10-P-1002-03H

4

Remove camshaft Hall sensor (B6/1).

 Installation: Replace sealing ring.

5

Install in the reverse order.

6

Read out and delete fault memory.



AD00.00-P-2000-06ME

 Warning

Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running.

Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts.

AS00.00-Z-0005-01A

7

Carry out engine test run and check engine for proper leak tightness and leak tightness.

8

Install upper engine cover.

AR01.10-P-2405OID

 Hall sensor

Number

Designation

Engine 656

BA15.10-P-1002-03H

Camshaft position sensor on cylinder head cover

Nm

8