AR15.00-P-2135SN | Remove/install rpm sensor | 18.9.02 |
ENGINE 660.940 in MODEL 450.3 /4 (except , 450.418)
P15.00-2107-06
1 Latch
2 Engine compartment cover
3 Clip
4 Clip
5 Cable
6 Rpm sensor plug
L8 Crankshaft rpm sensor
| Remove/Install | ||
1 | Screw off latch (1) and remove engine compartment cover (2) | ||
2 | Slacken clamp (3) and disconnect cable (5) at mixing chamber | ||
3 | Slacken clamp (4), disconnect cable (5) and remove | ||
4 | Decontact plug of rpm sensor (6) | Act carefully, otherwise the catch lug at the plug can break off. Installation: Ensure that the plug locks in position. | |
5 | Unscrew bolt at crankshaft rpm sensor (L8) and pull crankshaft rpm sensor (L8) out of housing | ||
6 | Install in the reverse order |