ar1440d2036ad

Install wiring harness for the heating element of metering device

Typ ar · temat 14.40 · wersja 0102 · 2012-02-16

Dotyczy: ENGINE 900.917 /918 /919 in MODEL 668.###, 670.### ## up to 126250

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 1 Silnik › 14 Kolektor wydechowy, hamulec silnikowy, instalacja oczyszczania spalin › 14.40 Układ oczyszczania spalin, AdBlue — Seria 668 · Seria 670 · Seria 900 (modele 917, 918, 919)

EinPAS 15 Silnik › 15.40 Układ wydechowy/ układ oczyszczania spalin › 15.40.12 Czujnik/ przełącznik/ wiązka przewodów — Seria 668 · Seria 670 · Seria 900 (modele 917, 918, 919)

AR14.40-D-2036AD

Install wiring harness for the heating element of metering device

15.2.12

ENGINE 900.917 /918 /919 in MODEL 668.###, 670.### ## up to 126250

Install

Danger!

Risk of explosion caused by escaping oxyhydrogen gas. Risk of injury caused by caustic burns to eyes, skin and mucous membranes from battery electrolyte (contains diluted sulfuric acid) or metal spatter due to short circuit. Risk of burn injuries caused by short circuit. Risk of poisoning caused by swallowing battery electrolyte (contains diluted sulfuric acid) or absorption of lead over the skin or orifices

No fire, sparks, open flames or smoking.

Wear acid-resistant gloves and clothing and safety glasses with side guards.

Do not place any conductive objects on the battery and avoid any short circuit from battery positive to ground.

Only fill liquid battery electrolyte (diluted sulfuric acid) into suitable and appropriately marked containers.

AS54.10-Z-0001-01A

1

Disconnect battery ground line

Notes on battery

AH54.10-P-0001-01A

2

Remove service cover

3

Route and connect wiring harness for the metering device heating element

Without code (MB1) Engine brake with constant throttle

AR14.40-D-2036-01AF

With code (MB1) Engine brake with constant throttle

AR14.40-D-2036-01AD

Terminal block for cable cross section up to 2.5 mm2

*BR00.45-Z-1002-12A

Danger!

Risk of explosion caused by escaping oxyhydrogen gas. Risk of injury caused by caustic burns to eyes, skin and mucous membranes from battery electrolyte (contains diluted sulfuric acid) or metal spatter due to short circuit. Risk of burn injuries caused by short circuit. Risk of poisoning caused by swallowing battery electrolyte (contains diluted sulfuric acid) or absorption of lead over the skin or orifices

No fire, sparks, open flames or smoking.

Wear acid-resistant gloves and clothing and safety glasses with side guards.

Do not place any conductive objects on the battery and avoid any short circuit from battery positive to ground.

Only fill liquid battery electrolyte (diluted sulfuric acid) into suitable and appropriately marked containers.

AS54.10-Z-0001-01A

4

Connect ground cable to battery

Notes on battery

AH54.10-P-0001-01A

5

Set time and radio and synchronize tachograph

6

Connect STAR DIAGNOSIS

The following conditions must be fulfilled before downloading:

- Battery voltage not under 24 V and not over 26 V.

- The power supply to STAR DIAGNOSIS must be guaranteed during the entire period.

During the download, do not

- Start any other application,

- Run or start the engine and

- The battery on the vehicle must not be disconnected.

Connect STAR DIAGNOSIS and read out fault memory

AD00.00-L-2000-04A

7

Run MR download

The download last approx. 45 minutes.

8

Code the "proportional valve 1" parameter in the engine control (MR) control unit to "diffuser heater"

9

Clear fault memory

Drive control (FR) control unit and engine control (MR) control unit.

10

Close STAR DIAGNOSIS

11

Install service cover

Repair materials

Number

Designation

Order number

BR00.45-Z-1002-12A

Terminal block for cable cross section up to 2.5 mm2

A 001 546 96 41

Powiązane dokumenty