ar1440b2035a

Prepare wiring harness for pump module

Typ ar · temat 14.40 · wersja 0202 · 2020-03-14

Dotyczy: Engine 457.9, 924.9, 926.9 except code MS5 (Euro V) Engine 924.9, 926.9 except code MS5 (Euro V) Engine 926.9 except code MS5 (BlueTec 5)

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 1 Silnik › 14 Kolektor wydechowy, hamulec silnikowy, instalacja oczyszczania spalin › 14.40 Układ oczyszczania spalin, AdBlue

EinPAS 15 Silnik › 15.40 Układ wydechowy/ układ oczyszczania spalin › 15.40.12 Czujnik/ przełącznik/ wiązka przewodów

Dotyczy też silników/skrzyń biegów: 457 9**, 924 9**, 926 9**

AR14.40-B-2035A

Prepare wiring harness for pump module

18.02.2020

Engine

457.9, 924.9, 926.9

except code MS5 (Euro V)

Engine

924.9, 926.9

except code MS5 (Euro V)

Engine

926.9

except code MS5 (BlueTec 5)

Prepare wiring harness for pump module

Pump module connection end

1

Connection contact (Ø 1.5 mm ELA)

2

Seal

3

Cable (white)

4

Cable (white/black)

5

Corrugated hose insulation

6

Plug

7

Contact socket

W14.40-1291-04

Prepare wiring harness for pump module

Connection end to the SCR chassis control unit outlet

3

Cable (white)

4

Cable (white/black)

5

Corrugated hose insulation

8

Seal

9

Connection contact (MCP 1.5 ELA)

W14.40-1289-01

1

Turn off ignition

2

Insert the electrical cables (3,4) into the corrugated hose insulation (5)

The new harness with the cables (3,4) should not be the one integrated in the SCR harness insulation between the pump module and the chassis control unit, it must be arranged next to it.
The length of the electrical harness to be manufactured depends on the distance between the pump module and the SCR chassis control unit.

3

Install the connector on the cables (3,4) on the pump module contact


.

AR54.18-B-0010B

Crimp the electrical fitting contacts (1) with crimping pliers.

4

Install the electrical cables (3,4) into the fitting contact (9) of the SCR chassis control unit connection


.

AR54.18-B-0010B

Crimp the electrical fitting contacts (9) with crimping pliers.

Powiązane dokumenty