ar1420s7667ea

Remove/install exhaust gas recirculation cooler bypass switchover valve

Typ ar · temat 14.20 · wersja 0101 · 2020-02-19

Dotyczy: Engine 654.9 in model 447

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 1 Silnik › 14 Kolektor wydechowy, hamulec silnikowy, instalacja oczyszczania spalin › 14.20 Układ recyrkulacji spalin — Seria 447 · Seria 654 (modele 9**)

EinPAS 15 Silnik › 15.40 Układ wydechowy/ układ oczyszczania spalin › 15.40.13 Przewód sztywny/elastyczny/zawór — Seria 447 · Seria 654 (modele 9**)

AR14.20-S-7667EA

Remove/install exhaust gas recirculation cooler bypass switchover valve

13.02.2020

Engine

654.9 in model 447

Remove/install exhaust gas recirculation cooler bypass switchover valve

S14.20-A020-79

1

Switchover valve

5

Bracket

2

Electrical connector

6

Vacuum line

3

Vacuum hose

7

Vacuum hose

4

Screw

Warning

Risk of injury. Skin or eye injuries may result when handling hot or glowing objects.

Wear protective gloves, protective clothing and safety glasses, if necessary.

AS00.00-Z-0002-01A

Caution

Risk of injury caused by scraping or cutting body parts on sharp vehicle parts

Always wear protective gloves when working on or near sharp and non-deburred vehicle parts.
Deburr repair panels.

AS00.00-Z-0017-01A

Remove/install

1

Remove engine cover.

AR01.10-S-2405EA

2

Release and disconnect the electrical connector (2).

3

Disconnect vacuum hose (3) from vacuum cell.

4

Seal openings with suitable stop plug.

Record plug

*129589009100

5

Unclip vacuum line (6) from line bracket (arrow A).

6

Remove screw (4) and remove bracket (5) with switchover valve (1) until vacuum hose (7) is accessible.

7

Remove vacuum hose (7) from switchover valve (1).

8

Seal openings with suitable stop plug.

Record plug

*129589009100

9

Remove bracket (5) with switchover valve (1) and vacuum hose (3).

10

Remove vacuum hose (3) from switchover valve (1).

When replacing the switchover valve (1).

11

Detach the switchover valve (1) from the bracket (5) by hand.

When replacing the switchover valve (1).

12

Install in the reverse order.

13

Read out and clear fault memory with diagnostic device.

When replacing the switchover valve (1).

AD00.00-S-2000-04E

Warning

Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running.

Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts.

AS00.00-Z-0005-01A

14

Perform engine test run.

Remove/install exhaust gas recirculation cooler bypass switchover valve

129 589 00 91 00

Record plug

Powiązane dokumenty