1 | Electrical connector |
2 | Screw |
3 | Molded hoses |
B28/18 | Low-pressure exhaust gas recirculation differential pressure sensor |
P14.20-A013-06
Warning | Risk of burn injuries, suffocation and poisoning when working on the exhaust system and the components connected to it. Risk of suffocation and risk of poisoning caused by inhalation of gaseous and solid components of the exhaust. Risk of poisoning caused by skin contact with solid components of the exhaust. | Wear protective clothing and safety glasses. Use the extraction system. Move people out of the hazard area. | |
Topical note | Information on preventing damage to electronic components due to electrostatic discharge | ||
| Remove/install | ||
1 | Open click clamps, remove molded hoses (3). | Installation: Replace snap clamps. | |
Pliers for click clamps | |||
2 | Release electrical connector (1) and disconnect. | ||
3 | Unscrew bolt (2) and remove low-pressure exhaust gas recirculation differential pressure sensor ( B28/18). | Bolt, differential pressure sensor to air intake duct | |
4 | Install in the reverse order. | ||
5 | Read out and delete fault memory. | ||
|
171 589 00 37 00
Pliers for click clamps
Powiązane dokumenty
- ad0000p200006mfa
- ah5400p000101a Wskazówki dotyczące zapobiegania uszkodzeniom elementów elektronicznych na skutek rozładowania potencjału elektrostatycznego
- as4900z000101a Niebezpieczeństwo poparzenia, uduszenia i zatrucia podczas prac przy układzie wydechowym i połączonych z nim elementach. Niebezpieczeństwo uduszenia i zatrucia przez wdychanie gazowych i stałych składników spalin. Niebezpieczeństw