ar1410p3006sr

Remove/install exhaust manifold

Typ ar · temat 14.10 · wersja 0101 · 2016-07-29

Dotyczy: Engine 281.910 in model 453 (except 453.062/362/462)

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 1 Silnik › 14 Kolektor wydechowy, hamulec silnikowy, instalacja oczyszczania spalin › 14.10 Kolektor wydechowy — Seria 453 (modele 041, 042, 043, 044, 053, 091, 341, 342, 343, 344, 353, 391, 442, 443, 444, 453, 491)

EinPAS 15 Silnik › 15.40 Układ wydechowy/ układ oczyszczania spalin › 15.40.41 Kolektor/rura/tłumik/elastyczny przewód wydechowy — Seria 453 (modele 041, 042, 043, 044, 053, 091, 341, 342, 343, 344, 353, 391, 442, 443, 444, 453, 491)

Dotyczy też silników/skrzyń biegów: 281 910

AR14.10-P-3006SR

Remove/install exhaust manifold

15.07.2016

Engine

281.910 in model 453 (except 453.062/362/462)

Remove/install exhaust manifold

1

Exhaust manifold

2

Securing clamp

3

Control rod

4

Clamp

5

Nuts

6

ATL

7

Seal

P14.10-2147-05

Danger !

Risk of injury. Skin or eye injuries may result when handling hot or glowing objects.

Wear protective gloves, protective clothing and safety glasses, if necessary.

AS00.00-Z-0002-01A

Notes on self-locking nuts and bolts

AH00.00-N-0001-01A

Remove

1

Remove catalytic converter

AR49.10-P-5500SRA

2

Remove securing clamp (2)

3

Remove control rod (3) from exhaust manifold (1)

4

Unfasten clamp (4) and take off

5

Unscrew nuts (5)

6

Remove exhaust manifold (1)

Hold ATL (6) somewhat to the side.

7

Remove seal (7)

Replace seal (7).

Clean

8

Clean sealing surface on exhaust manifold (1)

When reusing the exhaust manifold (1).

9

Clean sealing surface on cylinder head

Install

10

Lay new seal (7) on cylinder head

11

Hold ATL (6) somewhat to the side and attach exhaust manifold (1) with nuts (5) to the cylinder head

Screw on nuts (5) evenly up to the stop.

12

Tighten nuts (5)

Nut, exhaust manifold to cylinder head

*BA49.10-P-1002-02C

13

Install clamp (4) and tighten down

14

Attach control rod (3) to exhaust manifold (1)

15

Install new safety clip (2)

16

Install catalytic converter

AR49.10-P-5500SRA

Only install covering over engine after the leak test.

Check

Danger !

Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running.

Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts.

AS00.00-Z-0005-01A

17

Perform an engine test run and check exhaust system in the area of the exhaust manifold (1) for leaktightness

Exhaust system

Number

Designation

Engine 281.910

BA49.10-P-1002-02C

Nut, exhaust manifold to cylinder head

Nm

35

Powiązane dokumenty