ar1322p1202mfe

Remove/install poly-V belt

Typ ar · temat 13.22 · wersja 0101 · 2019-05-03

Dotyczy: Engine 608 in model 118, 177, 247

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 1 Silnik › 13 Sprężarka powietrza, napędy pasowe › 13.22 Napęd jednopasowy — Seria 118 · Seria 177 · Seria 247

EinPAS 15 Silnik › 15.18 Napęd paskowy › 15.18.30 Pasek/koło pasowe/koło bierne/napinacz — Seria 118 · Seria 177 · Seria 247

Dotyczy też silników/skrzyń biegów: 608 ***

AR13.22-P-1202MFE

Remove/install poly-V belt

30.04.2019

Engine

608 in model 118, 177, 247

Remove/install poly-V belt

P13.22-2218-08

Shown on model 177

1

Poly-V-belt

2

Hexagon

Remove/install poly-V belt

Routing diagram of the poly-V-belt

P05.00-2127-11

Caution

Risk of injury caused by scraping or cutting body parts on sharp vehicle parts

Always wear protective gloves when working on or near sharp and non-deburred vehicle parts.
Deburr repair panels.

AS00.00-Z-0017-01A

Warning

Risk of injury. Moving parts can pinch, crush or, in extreme cases even sever extremities.

No parts of the body or limbs should be within the operating area of mechanical components when moving components.

AS00.00-Z-0009-01A

Remove/install

1

Remove lower engine compartment paneling

AR61.20-P-1105MFE

2

Remove front right wheel and tire assembly.

AR40.10-P-1102MFA

3

Remove front section of the fender liner in the front right fender.

AR88.10-P-1301MFA

4

Mark running direction of the poly-V-belt (1).

When reusing the poly-V-belt (1).

5

Tension clamping device on hexagon (2), remove poly-V-belt (1), and guide out of front right wheel arch.

6

Check poly-V-belt (1) for wear, aging (crack formation), and damage; replace if necessary.

AP13.22-P-1351-01A

7

Install in the reverse order.

Powiązane dokumenty