ar1320d0002tsm
Remove/install tensioning device for poly-V belt of refrigerant compressor
Typ ar · temat 13.20 · wersja 0100 · 2020-07-20
Dotyczy: Engine 654.9 in model 907.6 with code HK4 (Rear air conditioning, reinforced)
Niedostępne w języku „pl”; wyświetlono w języku Angielski.
Umiejscowienie
Grupa funkcyjna 1 Silnik › 13 Sprężarka powietrza, napędy pasowe › 13.20 Napęd pasowy - informacje ogólne — Seria 654 (modele 9**) · Seria 907 (modele 6**)
EinPAS 15 Silnik › 15.18 Napęd paskowy › 15.18.30 Pasek/koło pasowe/koło bierne/napinacz — Seria 654 (modele 9**) · Seria 907 (modele 6**)
AR13.20-D-0002TSM
| Remove/install tensioning device for poly-V belt of refrigerant compressor
| 05.03.2020
|
Engine
| 654.9 in model 907.6
|
|
| with code HK4 (Rear air conditioning, reinforced)
|
1
| Tensioning device
|
2
| Screw
|
3
| Poly-V-belt
|
| Remove/install
|
|
|
1
| Release tension of the poly-V-belt (3) for the refrigerant compressor and remove from the clamping device (1).
|
| AR13.21-D-0161TSM
|
|
|
| Do not remove poly-V-belt (3).
|
|
2
| Remove screw (2) and remove with the clamping device (1).
| Installation: Slightly hand tighten screw (2).
The screw (2) is tightened when tensioning the poly-V-belt (3).
|
|
3
| Remove screw (2) from the clamping device (1).
|
|
|
| Check
|
|
|
4
| Check the clamping device (1) for damage.
| If there is a problem,
|
|
|
|
|
|
|
|
|
| Replace clamping device(1).
|
|
5
| Install in the reverse order.
|
|
|
Powiązane dokumenty
