ar0941s6817ef

Remove/install charge air cooler

Typ ar · temat 09.41 · wersja 0201 · 2020-08-19

Dotyczy: Model 447 with engine 622.9

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 1 Silnik › 09 Zasysanie powietrza, doładowanie › 09.41 Przewód powietrza doładowującego/chłodzenie powietrza doładowującego — Seria 447 · Seria 622 (modele 9**)

EinPAS 15 Silnik › 15.30 Ssanie powietrza/ doładowanie › 15.30.45 Chłodnica powietrza doładowywanego — Seria 447 · Seria 622 (modele 9**)

AR09.41-S-6817EF

Remove/install charge air cooler

19.08.2020

Model

447 with engine 622.9

Modification notes

13.03.2019

Screw, front module carrier to crossmember

BA62.30-N-1002-01C

Remove/install charge air cooler

S09.41-4584-09

1

Charge air cooler

5

Screw

8

Lock

2

Cable

6

Side air duct segment

9

Bracket

3

Front end crossmember

7

Upper air duct segment

10

Lock

4

Screw

Remove/install

1

Remove front bumper

AR88.20-S-2000E

2

Remove charge air hose downstream of charge air cooler (1) at charge air cooler (1)

AR09.41-S-8625EF

3

Remove charge air hose upstream of charge air cooler (1) at charge air cooler (1)

AR09.41-S-8621EF

4

Unhook cable (2) for hood latch and place to one side

5

Remove front end crossmember (3)

To do so, remove the screws/bolts (4, 5).

Screw, front module carrier to crossmember

*BA62.30-N-1002-01C

6

Remove side air duct segments (6)

7

Remove upper air duct segment (7)

8

Remove both locks (8)

9

Remove both holders (9)

For this purpose, turn bracket (9) through 90° and remove upwards.

10

Remove charge air cooler (1)

To do this unlock lock (10) and swivel up the charge air cooler (1).

Installation: Charge air cooler (1) must audibly engage.

11

Install in the reverse order

Check

Warning

Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running.

Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts.

AS00.00-Z-0005-01A

12

Check for leak tightness with engine running

Visual inspection only.

Cross member and front reinforcement

Number

Designation

Model 447, 448

BA62.30-N-1002-01C

Screw, front module carrier to crossmember

Nm

12

Powiązane dokumenty