Shown on engine 622.9 |
1 | Electrical connector |
2 | Screw |
B5/14 | Charge air pressure and temperature sensor |
S09.41-4583-06
Shown on engine 622.8 |
1 | Electrical connector |
2 | Screw |
B5/14 | Charge air pressure and temperature sensor |
S09.41-A035-76
Topical note | Information on preventing damage to electronic components due to electrostatic discharge | ||
| Remove/install | ||
1 | Remove air filter housing. | ||
2 | Remove air intake pipe. | Model 447 with engine 622.8 | |
3 | Release electrical connector(1) and disconnect. | ||
| Check | ||
4 | Check manufacturer of the charge air pressure and temperature sensor (B5/14). | Model 447.### ## as of 001854 up to 097079 with engine 622 | |
The manufacturer's details are printed on the charge air pressure and temperature sensor (B5/14). | |||
If the manufacturer's details show "Continental," | |||
| |||
replace charge air pressure and temperature sensor (B5/14). | |||
| |||
If the manufacturer's details show "Bosch," | |||
| |||
The charge air pressure and temperature sensor (B5/14) does not need to be replaced. | |||
5 | Remove screw (2) and remove charge air pressure and temperature sensor (B5/14). | Model 447.### ## as of 001854 up to 097079 with engine 622 | |
Installation: Check sealing ring on the charge air pressure and temperature sensor (B5/14). | |||
Bolt, boost pressure and charge air temperature sensor | |||
If damage is determined on the sealing ring, | |||
| |||
replace sealing ring of the charge air pressure and temperature sensor (B5/14). | |||
6 | Install in the reverse order. |
Powiązane dokumenty
- ah5400p000101a Wskazówki dotyczące zapobiegania uszkodzeniom elementów elektronicznych na skutek rozładowania potencjału elektrostatycznego
- ar0910s1150ef
- ar0910s8131eh
- sm0941s0021a