ar0941s2006e

Remove/install boost pressure sensor

Typ ar · temat 09.41 · wersja 0101 · 2015-10-29

Dotyczy: Model 447 with engine 651

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 1 Silnik › 09 Zasysanie powietrza, doładowanie › 09.41 Przewód powietrza doładowującego/chłodzenie powietrza doładowującego — Seria 447 · Seria 651

EinPAS 15 Silnik › 15.30 Ssanie powietrza/ doładowanie › 15.30.12 Czujnik/ przełącznik/ wiązka przewodów — Seria 447 · Seria 651

AR09.41-S-2006E

Remove/install boost pressure sensor

28.10.15

Model

447 with engine 651

Remove/install boost pressure sensor

1

Electrical connector

2

Vacuum hose

B5/9

Low-pressure turbocharger boost pressure sensor

S09.41-4573-06

Remove/install

1

Remove engine cover

AR01.10-S-2405E

2

Disconnect electrical connection (1)

3

Remove vacuum hose (2)

4

Remove low-pressure turbocharger boost pressure sensor (B5/9)

Screw/bolt, pressure sensor to bracket

*BA07.04-N-1011-01F

5

Install in the reverse order

Check

Danger !

Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running.

Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts.

AS00.00-Z-0005-01A

6

Check for leaktightness with engine running

Visual inspection only.

Sensors, transmitters

Number

Designation

Engine 651 in model 447

BA07.04-N-1011-01F

Screw/bolt, pressure sensor to bracket

Nm

4

Powiązane dokumenty