Remove/install charge air pressure and temperature sensor downstream of throttle valve

AR09.41-P-2012MRO

Remove/install charge air pressure and temperature sensor downstream of throttle valve

10.08.2020

Engine

264 in model 463

1

Electrical connector

B28/27

Pressure and temperature sensor downstream of throttle valve

2

Screw

Topical note

Information on preventing damage to electronic components due to electrostatic discharge

AH54.00-P-0001-01A

Topical note

Notes on avoiding damage through contamination and foreign objects

AH00.00-P-5000-01A

 

Remove/install

1

Remove air filter housing.

AR09.10-P-1150MRO

 Installation: Only install upper engine cover after the leak test.

2

Release electrical connector(1) and disconnect.

3

Remove screw (2), remove pressure and temperature sensor downstream of throttle valve (B28/27), and seal with suitable stop plug.

 Installation: Check sealing ring, replace if necessary, and wet with lubricant.

 Bolt, pressure sensor to charge air distributor

*BA09.20-P-1002-01H

Lubricant, rubber assembly 1 l

*BR00.45-Z-1010-06A

 Record plug

*129589009100

 Assembly tool

*000589936300

4

Install in the reverse order.

Finishing activity

5

Connect vehicle diagnosis system, read out fault memory and clear if necessary.



Engine 264
as of model year 2020

AD00.00-P-2000-04B

 Warning

Risk of burn injuries, suffocation and poisoning when working on the exhaust system and the components connected to it. Risk of suffocation and risk of poisoning caused by inhalation of gaseous and solid components of the exhaust. Risk of poisoning caused by skin contact with solid components of the exhaust.

Wear protective clothing and safety glasses. Use the extraction system. Move people out of the hazard area.

AS49.00-Z-0001-01A

 Warning

Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running.

Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts.

AS00.00-Z-0005-01A

6

Perform engine test run. While doing so, check engine for proper operation and leak tightness.

 Intake manifold

Number

Designation

Engine 264

BA09.20-P-1002-01H

Bolt, pressure sensor to charge air distributor

Nm

6

Repair materials

Number

Designation

Order number

BR00.45-Z-1010-06A

Lubricant, rubber assembly 1 l

A 000 989 03 67