AR09.41-P-2004MCF | Remove/install boost pressure control pressure transducer | 2.12.11 |
ENGINES 660.951 in MODEL 451.3## /4## #K as of 452008
P09.41-2610-06
1 Vacuum hoses
2 Nut
3 Electrical connector
4 Nut
Y100 Left boost pressure positioner
| Remove/install | ||
1 | Lower rear drive module | ||
2 | Loosen nuts (2), unscrew nut (4) and remove LH boost pressure regulator (Y100) until the electrical connection (3) is accessible | ||
3 | Disconnect electrical connector (3) from left boost pressure positioner (Y100) | ||
4 | Detach vacuum hoses (1) from LH boost pressure regulator (Y100) and remove LH boost pressure regulator (Y100) | Installation: Do not use any slide or lubricant when assembling the vacuum hoses (1). Function impairments of the LH boost pressure regulator (Y100) can occur otherwise. | |
5 | Install in the reverse order | ||
6 | Read out fault memory, erase if necessary |