ar0941d8625tsr

Remove/install charge air hose downstream of the charge air cooler

Typ ar · temat 09.41 · wersja 0201 · 2019-09-23

Dotyczy: Engine 642 in model 907 Engine 651 in model 907, 910

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 1 Silnik › 09 Zasysanie powietrza, doładowanie › 09.41 Przewód powietrza doładowującego/chłodzenie powietrza doładowującego — Seria 651 · Seria 907 · Seria 910

EinPAS 15 Silnik › 15.30 Ssanie powietrza/ doładowanie › 15.30.32 Przewód sztywny/elastyczny/zawór — Seria 651 · Seria 907 · Seria 910

Dotyczy też silników/skrzyń biegów: 642 ***

AR09.41-D-8625TSR

Remove/install charge air hose downstream of the charge air cooler

16.07.2019

Engine

642 in model 907

Engine

651 in model 907, 910

Remove/install charge air hose downstream of the charge air cooler

Shown on model 907 with engine 651

1

Charge air hose

2

Lower connector

3

Upper connector

D09.41-1201-06

Remove/install charge air hose downstream of the charge air cooler

Shown on model 907 with engine 642

1

Charge air hose

2

Lower connector

3

Upper connector

D09.41-A012-82

Remove/install charge air hose downstream of the charge air cooler

Shown on model 910 with engine 651

1

Charge air hose

2

Lower connector

3

Upper connector

D09.41-A013-82

Warning

Risk of injury. Skin or eye injuries may result when handling hot or glowing objects.

Wear protective gloves, protective clothing and safety glasses, if necessary.

AS00.00-Z-0002-01A

Danger

Risk of death caused by vehicle slipping or toppling off of the lifting platform.

Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by the vehicle manufacturer.

AS00.00-Z-0010-01A

Topical note

Notes on avoiding damage through contamination and foreign objects

AH00.00-P-5000-01A

Remove/install

1

Raise vehicle.

AR00.60-D-1000-04TS

Topical note

Special instructions for lifting and supporting vehicle

AH00.60-N-0100-01TS

2

Remove lower engine compartment paneling


Model 907, 910 with code XM1 (Noise abatement measures)

AR61.20-D-1105TS

Installation: Only install engine compartment paneling below after leak test.

3

Remove upper coupling (3).

AR09.41-D-1311-01WE

Assembly tool

*000589936300

4

Remove lower coupling (2).

AR09.41-D-1311-01WE

Assembly tool

*000589936300

5

Remove charge air hose (1).

6

Install in the reverse order.

Check

Warning

Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running.

Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts.

AS00.00-Z-0005-01A

7

Check for leaktightness when engine is running.

Visual inspection only.

Remove/install charge air hose downstream of the charge air cooler

000 589 93 63 00

Assembly tool

Powiązane dokumenty