ar0941d1311d

Remove/install charge air pipe

Typ ar · temat 09.41 · wersja 0107 · 2012-02-16

Dotyczy: ENGINE 904.904 in MODEL 670 ENGINES 904.908 /914 /923 /936 in MODELS 668, 670

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 1 Silnik › 09 Zasysanie powietrza, doładowanie › 09.41 Przewód powietrza doładowującego/chłodzenie powietrza doładowującego — Seria 668 · Seria 670 · Seria 904 (modele 904, 908, 914, 923, 936)

EinPAS 15 Silnik › 15.30 Ssanie powietrza/ doładowanie › 15.30.33 Kolektor ssąsy/przewód powietrza doładowywanego — Seria 668 · Seria 670 · Seria 904 (modele 904, 908, 914, 923, 936)

AR09.41-D-1311D

Remove/install charge air pipe

15.2.12

ENGINE 904.904 in MODEL 670

ENGINES 904.908 /914 /923 /936 in MODELS 668, 670

Remove/install charge air pipe

D09.41-0003-06

1 Charge air pipe

2 Clip

3 Bolt

4 Bolt

5 Charge air hose (red)

6 Hose clamp

7 Sealing ring

Remove/install

1

Switch off ignition

Danger!

Risk of explosion caused by escaping oxyhydrogen gas. Risk of injury caused by caustic burns to eyes, skin and mucous membranes from battery electrolyte (contains diluted sulfuric acid) or metal spatter due to short circuit. Risk of burn injuries caused by short circuit. Risk of poisoning caused by swallowing battery electrolyte (contains diluted sulfuric acid) or absorption of lead over the skin or orifices

No fire, sparks, open flames or smoking.

Wear acid-resistant gloves and clothing and safety glasses with side guards.

Do not place any conductive objects on the battery and avoid any short circuit from battery positive to ground.

Only fill liquid battery electrolyte (diluted sulfuric acid) into suitable and appropriately marked containers.

AS54.10-Z-0001-01A

2

Disconnect ground lead from battery

Notes on battery

All models

AH54.10-P-0001-01A

3

Remove air intake hose

AR09.10-D-8030D

4

Detach hose clamp (6) on charge air hose (5)

Inspect condition of hose clamp (6), replace if necessary.

5

Remove bolt (3) and clamp (2) on charge air pipe (1)

Inspect condition of clamp (2), replace if necessary.

6

Remove bolt (4) and charge air pipe (1) from turbocharger

*BA09.41-N-1004-01B

Installation: Replace seal (7).

7

Pull charge air pipe (1) out of charge air hose (5) and remove upwards

8

Install in the reverse order

Charge air pipe/charge air cooling

Number

Designation

Engine
904.9 in model 668, 670

BA09.41-N-1004-01B

Bolt, charge air pipe to generator support

Nm

25

Powiązane dokumenty