D09.41-A016-79
1 | Boost pressure sensor | 3 | Screw | |
2 | Electrical connector | 4 | Sealing ring |
Topical note | Notes on avoiding damage through contamination and foreign objects | ||
Topical note | Information on preventing damage to electronic components due to electrostatic discharge | ||
| Remove/install | ||
1 | Clean area around boost pressure sensor (1). | Assembly cleaner | |
2 | Release and disconnect the electrical connector (2). | ||
3 | Remove screw (3). | Bolt, boost pressure sensor to mixer housing | |
4 | Detach boost pressure sensor (1) from mixer housing and remove in upward direction. | ||
5 | Seal opening at mixer housing using a stop plug. | Record plug | |
6 | Check sealing ring (4) for damage. | If boost pressure sensor (1) is not replaced. | |
If damage is identified, | |||
| |||
replace boost pressure sensor (1). | |||
7 | Install in the reverse order. | ||
| Check | ||
8 | Read out and delete fault memory. | ||
| |||
Warning | Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running. | Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts. | |
9 | Perform engine test run and check mixer housing in area of boost pressure sensor (1) for leaks. |
129 589 00 91 00
Record plug
Powiązane dokumenty
- ad0000d200006ts
- ah0000p500001a Wskazówki dotyczące zapobiegania uszkodzeniom na skutek zabrudzeń i ciał obcych
- ah5400p000101a Wskazówki dotyczące zapobiegania uszkodzeniom elementów elektronicznych na skutek rozładowania potencjału elektrostatycznego
- as0000z000501a Niebezpieczeństwo wypadku na skutek samoczynnego ruszenia przy pracującym silniku. Niebezpieczeństwo obrażeń na skutek zmiażdżenia lub poparzenia przy wykonywaniu czynności podczas rozruchu lub przy pracującym silniku.