S09.40-4549-09
1 | Screw/bolt | 4 | Screw/bolt | Y77/7 | Wastegate pressure transducer | ||
2 | Vacuum hose | 5 | Screw/bolt | ||||
3 | Electrical connection | B5/9 | Low-pressure turbocharger boost pressure sensor |
| Remove/install | ||
1 | Remove air filter housing | ||
2 | Remove glow output stage | ||
3 | Remove low-pressure turbocharger boost pressure sensor (B5/9) and place to one side | To do this, remove screw/bolt (1). | |
4 | Remove vacuum hoses (2) | Note assignment of the vacuum hoses (2). | |
Installation: Check vacuum hoses (2); inspect and, if necessary, replace. Ensure correct assignment of the vacuum hoses (2). | |||
5 | Disconnect electrical connection (3) | ||
6 | Remove screw/bolt (4) | ||
7 | Loosen screw/bolt (5) | ||
8 | Remove wastegate pressure transducer (Y77/7) | ||
9 | Install in the reverse order |