ar0940p3000mro

Remove/install divert air switchover valve

Typ ar · temat 09.40 · wersja 0100 · 2020-05-19

Dotyczy: Engine 264 in model 463

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 1 Silnik › 09 Zasysanie powietrza, doładowanie › 09.40 Turbosprężarka — Seria 463

EinPAS 15 Silnik › 15.30 Ssanie powietrza/ doładowanie › 15.30.32 Przewód sztywny/elastyczny/zawór — Seria 463

Dotyczy też silników/skrzyń biegów: 264 ***

AR09.40-P-3000MRO

Remove/install divert air switchover valve

18.05.2020

Engine

264 in model 463

Remove/install divert air switchover valve

1

Bolts

2

Electrical connector

Y101

Divert air switchover valve

P09.40-2620-12

Remove/install divert air switchover valve

3

Air intake pipe

P09.40-A074-06

Warning

Risk of injury. Skin or eye injuries may result when handling hot or glowing objects.

Wear protective gloves, protective clothing and safety glasses, if necessary.

AS00.00-Z-0002-01A

Caution

Risk of injury caused by scraping or cutting body parts on sharp vehicle parts

Always wear protective gloves when working on or near sharp and non-deburred vehicle parts.
Deburr repair panels.

AS00.00-Z-0017-01A

Topical note

Information on preventing damage to electronic components due to electrostatic discharge

AH54.00-P-0001-01A

Topical note

Notes on avoiding damage through contamination and foreign objects

AH00.00-P-5000-01A

Remove/install

1

Remove air intake pipe (3).

2

Release and disconnect the electrical connector (2).

3

Remove bolts (1).

Screw/bolt, bypass air switchover valve to charge air cooler

*BA09.41-P-1003-03F

4

Remove overrun mode bypass air switchover valve (Y101).

5

Install in the reverse order

6

Connect vehicle diagnosis system, read out fault memory and clear if necessary.

Engine 264 in model 463
as of model year 2020

AD00.00-P-2000-04B

Warning

Risk of burn injuries, suffocation and poisoning when working on the exhaust system and the components connected to it. Risk of suffocation and risk of poisoning caused by inhalation of gaseous and solid components of the exhaust. Risk of poisoning caused by skin contact with solid components of the exhaust.

Wear protective clothing and safety glasses. Use the extraction system. Move people out of the hazard area.

AS49.00-Z-0001-01A

Warning

Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running.

Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts.

AS00.00-Z-0005-01A

7

Perform engine test run. While doing so, check engine for proper operation and leak tightness.

Charge air cooler

Number

Designation

Engine 264

BA09.41-P-1003-03F

Screw/bolt, bypass air switchover valve to charge air cooler

M6

Nm

9

Powiązane dokumenty