Remove, install intake port shutoff actuator motor

AR09.20-P-1313FF

13.4.06

ENGINE 639.9 in MODEL 454.0

P09.20-2217-09

1 Bolts

2 Clip

3 Venting hose

4 Charge air hose

9 Bolts

M55 Intake port shutoff motor

5 Charge air pipe

6 Charge air distribution pipe

7 Electrical connector

8 Cable duct

 	Remove/install
1	Remove air filter housing		AR09.10-P-1150FG
2	Loosen the clamp (2)
3	Undo bolts (1) and pull vent hose (3) up and out of the guide at transmission	 Installation: Ensure that the vent hose (3) is seated correctly
4	Pull the charge air hose (4) from the charge air pipe (5)
5	Place charge air pipe (5) to one side.
6	Remove bolt at cable duct (8) in the area of the intake port shutoff motor (M55) and push cable duct (8) to the side
7	Remove bolts (9) and Intake port shutoff motor (M55) at charge air distribution pipe (6)	 Installation: Ensure correct seating of intake port shutoff motor (M55) at charge air distribution pipe (6).
8	Disconnect electrical connector (7) and remove intake port shutoff motor (M55)
9	Install in the reverse order
10	Read fault memory, erase if necessary
	Connect STAR DIAGNOSIS and read out fault memory		AD00.00-P-2000-04FF
		STAR DIAGNOSIS diagnosis system	*WH58.30-Z-1048-13A

Commercially available tools

Number	Designation
WH58.30-Z-1048-13A	STAR DIAGNOSIS diagnosis system, Compact Passenger Car	6511 1801 00