Remove/install air intake pipe

AR09.10-D-8131TS

Remove/install air intake pipe

08.07.2019

Engine

651 in model 907

Modification notes

08.07.2019

BA09.10-N-1002-01TS added.

Operation step 1

08.07.2019

BA09.10-N-1004-01TS added

Operation step 6

1

Air intake pipe

2

Electrical connectors

3

Electrical wiring harness

4

Hose

5

Clip

6

Clip

7

Hot film mass air flow sensor

 Warning

Risk of injury. Skin or eye injuries may result when handling hot or glowing objects.

Wear protective gloves, protective clothing and safety glasses, if necessary.

AS00.00-Z-0002-01A

Topical note

Notes on avoiding damage through contamination and foreign objects

Omnibus

AH00.00-N-5000-01H

Topical note

Notes on avoiding damage through contamination and foreign objects

Leichte Transporter

AH00.00-P-5000-01A

Topical note

Information on preventing damage to electronic components due to electrostatic discharge

AH54.00-P-0001-01A

 

Remove/install

1

Release clip (6).

 Installation: Check clamp (6) for damage.

 Clamp, air intake pipe to hot film mass air flow sensor

*BA09.10-N-1002-01TS

Depending on the findings,



Replace damaged clamp (6).

2

Disconnect electrical connectors (2).

3

Remove electrical wiring harness (3) from air intake pipe (1).

 Installation: Replace required cable ties.

4

Remove air intake pipe (1) from hot film mass air flow sensor (7).

5

Remove hose (4) from air intake pipe (1).

6

Release clamp (5).

 Installation: Check the clamp (5) for damage.

 Clamp, air intake pipe to turbocharger

*BA09.10-N-1004-01TS

Depending on the findings,



Replace the damaged clamp (5).

7

Remove air intake pipe (1).

 Installation: Check seals.

Depending on the findings,



Replace seals.

8

Install in the reverse order.



Check

 Warning

Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running.

Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts.

AS00.00-Z-0005-01A

9

Check for leaktightness when engine is running.

 Visual inspection only.

 Air filter

Number

Designation

Engine 651 in model 907

BA09.10-N-1002-01TS

Clamp, air intake pipe to hot film mass air flow sensor

Nm

4

 Air filter

Number

Designation

Engine 651 in model 907

BA09.10-N-1004-01TS

Clamp, air intake pipe to turbocharger

Nm

4