Remove/install air filter housing

AR09.10-D-1150TSM

Remove/install air filter housing

20.01.2020

Engine

654.9 in model 907.1/2/6

1

Air cleaner housing

2

Electrical connector

3

Screw clamp

4

Air intake hose

5

Bracket

6

Bracket

7

Bracket

8

Air ducting

9

Tab

Topical note

Notes on avoiding damage through contamination and foreign objects

AH00.00-P-5000-01A

Topical note

Information on preventing damage to electronic components due to electrostatic discharge

AH54.00-P-0001-01A

 

Remove/install

1

Release and disconnect the electrical connector (2).

2

Release screw clamp (3) and remove air intake hose (4) from hot film mass air flow sensor.

 Installation: Check screw clamp (3) for damage.

Lubricant, rubber assembly 1 l

*BR00.45-Z-1010-06A

 Clamp, air intake pipe/air intake hose to hot film mass air flow sensor

*BA09.10-N-1002-01TS

If there is a problem,



Replace screw clamp (3).

3

Seal opening at air intake hose (4) and at hot film mass air flow sensor with protective covers.

 Set of protective caps

*001589029100

4

Press back tabs (9) in succession at air filter housing (1) and remove brackets (5, 6, 7) and place to one side.

5

Remove air filter housing (1) upwards out of rear guides (arrows B).

 Installation: Check rear guides (arrows B) for wear and damage.

Lubricant, rubber assembly 1 l

*BR00.45-Z-1010-06A

If there is a problem:



Replace rear guides (arrows B).

6

Remove air filter housing (1) towards rear out of front guides (arrows A).

 Installation: Check front guides (arrows A) for wear and damage.

Lubricant, rubber assembly 1 l

*BR00.45-Z-1010-06A

If there is a problem:



Replace front guides (arrows A).

7

Remove air filter housing (1) with air ducting (8).

 Installation: Insert air ducting (8) into front duct.

8

Remove hot film mass air flow sensor.

If the air filter housing (1) is replaced.

AR07.07-D-1456TSM

9

Remove air ducting (8) from air filter housing (1).

If the air filter housing (1) is replaced.

Lubricant, rubber assembly 1 l

*BR00.45-Z-1010-06A

10

Install in the reverse order.



Check

 Warning

Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running.

Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts.

AS00.00-Z-0005-01A

11

Perform engine test run and check air filter housing (1) for leaks.

 Visual inspection.

 Air filter

Number

Designation

Engine 654.9 in model 907

BA09.10-N-1002-01TS

Clamp, air intake pipe/air intake hose to hot film mass air flow sensor

Nm

4

Repair materials

Number

Designation

Order number

BR00.45-Z-1010-06A

Lubricant, rubber assembly 1 l

A 000 989 03 67