1a | Top section of air filter housing |
1b | Lower section of air filter housing |
2 | Windshield washer system washer fluid reservoir |
3 | Heat shield |
4 | Air intake hose |
5 | Electrical line |
6 | Clamps |
7 | Air filter element |
8 | Air intake line |
9 | Screw/bolt |
D09.10-1128-06
| Remove/install | ||
1 | Remove heat shield (3) | ||
2 | Remove intake air hose (4) | ||
3 | Detach windshield washer system washer fluid reservoir (2) at the body and place to one side | ||
4 | Disconnect electrical lines (5) at air filter housing upper section (1a) | ||
5 | Unfasten clamps (6) | ||
6 | Remove top section of air filter housing (1a) | To do this lift air filter housing upper section (1a) at the rear and pull out the air filter housing lower section (1a). | |
7 | Remove air filter element (7) | ||
8 | Detach intake air line (8) on air filter housing lower part (1b) and place to one side | ||
9 | remove screw/bolt (9) | ||
10 | Pull air filter housing lower part (1b) upwards and remove | Installation: Ensure correct seating of the rubber support of the air filter housing lower part (1b) on the body. | |
11 | Install in the reverse order |