ar0910d1150na

Remove/install air cleaner housing

Typ ar · temat 09.10 · wersja 0102 · 2002-09-16

Dotyczy: ENGINE 612.981 in MODEL WD1XD741, WD1XD541, WD1XD341, WD1XD241, WD1XD641, WD1XD441, WD1XD141, WD2YD241, WD2YD341, WD2YD741, WD2YD641, WD2YD141, WD2YD541, WD2YD441, WD5WD241, WD5WD741, WD5WD341, WD5WD641, WD5WD141 ENGINE 612.981 in MODEL 903.67 /61, 904.61 /66, 903.66 with CODE (ZU7) Country version "Canada" ENGINE 612.981 in MODEL 904.66, 903.61, 904.61, 903.67 /66 with CODE (ZU8) Country version "USA" ENGINE 612.981 in MODEL 903.67, 904.66, 903.61 /66, 904.61 with CODE (ZU9) Country version "Mexi

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 1 Silnik › 09 Zasysanie powietrza, doładowanie › 09.10 Filtr powietrza — Seria 903 (modele 61*, 66*, 67*) · Seria 904 (modele 61*, 66*)

EinPAS 15 Silnik › 15.30 Ssanie powietrza/ doładowanie › 15.30.40 Filtr powietrza/obudowa filtra powietrza — Seria 903 (modele 61*, 66*, 67*) · Seria 904 (modele 61*, 66*)

Dotyczy też silników/skrzyń biegów: 612 981

AR09.10-D-1150NA

Remove/install air cleaner housing

15.1.01

ENGINE 612.981
in MODEL WD1XD741, WD1XD541, WD1XD341, WD1XD241, WD1XD641, WD1XD441, WD1XD141,
WD2YD241, WD2YD341, WD2YD741, WD2YD641, WD2YD141, WD2YD541, WD2YD441,
WD5WD241, WD5WD741, WD5WD341, WD5WD641, WD5WD141

ENGINE 612.981 in MODEL 903.67 /61, 904.61 /66, 903.66 with CODE (ZU7) Country version "Canada"

ENGINE 612.981 in MODEL 904.66, 903.61, 904.61, 903.67 /66 with CODE (ZU8) Country version "USA"

ENGINE 612.981 in MODEL 903.67, 904.66, 903.61 /66, 904.61 with CODE (ZU9) Country version "Mexico"

Remove/install air cleaner housing

D09.10-1102-06

1 Hot film MAF sensor

2 Top part of air cleaner housing

3 Air cleaner element

4 Bottom part of air cleaner housing

5 Air intake hose

6 Gasket

7 Bolt

8 Heat shield

Remove/install

1

Remove heat shield (8)

2

Remove hot film mass air flow sensor (1)

AR07.07-D-1453A

3

Unclip top part of air cleaner housing (2) at bottom part of air cleaner housing (4) and take off

4

Take out air cleaner element (3)

5

Detach bottom part of air cleaner housing (4) at body

6

Take air intake hose (5) out of the inner fender and out of the rubber bush in the wheelhousing liner (arrow), then detach it at bottom part of air cleaner housing (4)

Installation: Pay attention to correct seating of the gasket (6) between the fender liner and air intake hose.

7

Take bottom part of air cleaner housing (4) out of the rubber bushes in the inner fender and remove

8

Install in the reverse order

Powiązane dokumenty