ar0840p0013eq

Replace upper rpm sensor on rear axle drive module

Typ ar · temat 08.40 · wersja 0200 · 2020-03-12

Dotyczy: Model 293

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 1 Silnik › 08 Napęd elektryczny, napęd hybrydowy › 08.40 Czujniki — Seria 293

EinPAS 15 Silnik › 15.50 Napęd elektryczny/ napęd hybrydowy › 15.50.12 Czujnik/ przełącznik/ wiązka przewodów — Seria 293

AR08.40-P-0013EQ

Replace upper rpm sensor on rear axle drive module

06.03.2020

Model

293

Replace upper rpm sensor on rear axle drive module

5

Cover

P08.40-A008-11

Replace upper rpm sensor on rear axle drive module

P08.40-A000-09

Shown on the removed drive unit for a better overview

1

Electrical connector

4

Line bracket

2

Screw

L20/2

Electric machine rotor rpm sensor 2

3

Electrical wiring harness

Danger

Risk of death when working on component parts and systems with U >= 30 V alternating voltage (AC) or U >= 60 V direct voltage (DC)

Do not touch damaged or defective live component parts and lines or non-insulated electrical connections and lines.

AS00.00-Z-0035-01A

Topical note

General information on vehicles with high-voltage on-board electrical system and/or lithium-ion battery and/or gaseous-fuel drive system as well as personal protective equipment

AH00.00-Z-0300-01A

Notes on safety-relevant components

AH00.00-Z-0019-01A

Remove/install

1

Lower axle drive module until the covers (5) can be removed.

AR08.10-P-0007EQ

2

Unclip the line bracket (4) and place the electrical wiring harness (3) to one side.

3

Disconnect electrical connector (1).

4

Clean area around the electric machine rotor rpm sensor 2 (L20/2).

Assembly cleaner

*BR00.45-Z-1028-04A

5

Remove screw/bolt (2).

6

Take out electric machine rotor rpm sensor 2 (L20/2)

Installation: Replace O-ring.

7

Install in the reverse order.

Repair materials

Number

Designation

Order number

BR00.45-Z-1028-04A

Assembly cleaner

A 000 986 56 01

Powiązane dokumenty