Remove/install rpm sensor at rear on axle drive module on front axle

AR08.40-P-0005EQ

Remove/install rpm sensor at rear on axle drive module on front axle

03.12.2019

Model

293

1

High-voltage line

2

Axle drive module

3

Screw

L20/4

Electric machine rotor rpm sensor 2

 Danger

Risk of death when working on component parts and systems with U >= 30 V alternating voltage (AC) or U >= 60 V direct voltage (DC)

Do not touch damaged or defective live component parts and lines or non-insulated electrical connections and lines.

AS00.00-Z-0035-01A

Topical note

General information on handling vehicles with high-voltage on-board electrical system and/or lithium-ion battery and/or gaseous-fuel drive system

AH00.00-Z-0300-01A

Notes on safety-relevant components

AH00.00-Z-0019-01A

 

Remove/install

1

Remove voltage of high-voltage on-board electrical system.

AR47.70-P-1000EQ

2

Remove engine compartment cover.

3

Unclip high voltage line (1) from the axle drive module (2).

 Dismantling tool

*000589956300

4

Release and disconnect electrical connector from electric machine rotor rpm sensor 2 (L20/4).

5

Remove screw (3) and remove electric machine rotor rpm sensor 2 (L20/4).

 Installation: Install new O-ring of electric machine rotor rpm sensor 2 (L20/4).

 Assembly tool

*000589936300

6

Install in the reverse order.