Remove/install radial shaft sealing ring at left on axle drive module

AR08.10-D-0052TE

Remove/install radial shaft sealing ring at left on axle drive module

06.03.2020

Engine

780.703 in model 910

1

Radial shaft sealing ring

2

Axle drive module

1

Radial shaft sealing ring

3

Drift

2

Axle drive module

 Caution

Risk of injury to skin and eyes due to handling of transmission oil. Health risk caused by swallowing transmission oil

Wear protective gloves, protective clothing and safety glasses.
Do not pour transmission oil into beverage bottles.

AS00.40-Z-0001-01A

 Danger

Risk of death when working on component parts and systems with U >= 30 V alternating voltage (AC) or U >= 60 V direct voltage (DC)

Do not touch damaged or defective live component parts and lines or non-insulated electrical connections and lines.

AS00.00-Z-0035-01A

 Danger

Risk of death caused by vehicle slipping or toppling off of the lifting platform.

Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by the vehicle manufacturer.

AS00.00-Z-0010-01A

Topical note

Notes on avoiding damage through contamination and foreign objects

AH00.00-P-5000-01A

Topical note

General information on vehicles with high-voltage on-board electrical system and/or lithium-ion battery and/or gaseous-fuel drive system as well as personal protective equipment

AH00.00-Z-0300-01A



Remove

1

Remove left front axle shaft.

AR33.30-D-0621TE

2

Remove radial shaft sealing ring (1) from axle drive module (2).


Use a suitable protective base and carefully remove radial shaft sealing ring (1).
Damage to sealing surface of axle drive module (2) can otherwise result in leaks.

 Collect any transmission oil which runs out.

 Commercially available devices/tools
Collecting pan

 Removal and installation tool

*116589016200



Clean

3

Clean sealing surface of radial shaft sealing ring (1) at axle drive module (2).

Assembly cleaner

*BR00.45-Z-1028-04A



Install

4

Slide new radial shaft sealing ring (1), as shown, up to end stop on drift (3) in direction of arrow (arrow A).

 Drift

*447589051500

5

Drive radial shaft sealing ring (1) with drift (3) up to end stop in axle drive module (2) in direction of arrow (arrow B).

 Drift

*447589051500

6

Pull drift (3) out of radial shaft sealing ring (1) and remove.

 Drift

*447589051500

7

Install front axle shaft at left.

AR33.30-D-0621TE



Check

8

Check transmission oil level.



Electric drive unit - Oil change

AP08.00-D-0001TE

If transmission oil level is incorrect,



Correct transmission oil level.

Repair materials

Number

Designation

Order number

BR00.45-Z-1028-04A

Assembly cleaner

A 000 986 56 01