ar0810d000901te

Attach/detach engine support fixture

Typ ar · temat 08.10 · wersja 0100 · 2019-08-26

Dotyczy: Engine 780.703 in model 910

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 1 Silnik › 08 Napęd elektryczny, napęd hybrydowy › 08.10 Silnik elektryczny — Seria 910

EinPAS 15 Silnik › 15.50 Napęd elektryczny/ napęd hybrydowy › 15.50.20 Silnik elektryczny — Seria 910

Dotyczy też silników/skrzyń biegów: 780 703

AR08.10-D-0009-01TE

Attach/detach engine support fixture

Engine

780.703 in model 910

Attach/detach engine support fixture
Attach/detach engine support fixture

910 589 00 63 00

Support braces

639 589 00 61 00

Engine lifting device

Attach/detach engine support fixture

D08.10-A001-08

The high-voltage on-board electrical system must be enabled for this purpose.

Depending on the follow-up work, the left or right engine support fixture on the tubular frame can be attached.
The engine support fixture consists of the following parts of the engine hoist (1) and supports (2):

Crossbar (3) without supports (5)

Supports (7) with mounts (4) and knurls (6)

Strut tower supports (8)

Support (9)

1

Remove supports (5) from the engine hoist (1).

2

Remove mounts (4) from supports (7).

To do this, remove knurls (6).

3

Attach mounts (4) to the crossbar (3).

Attach/detach engine support fixture

D08.10-A002-79

Shown on left mount on tubular frame

Attach/detach engine support fixture

D08.10-A003-79

Shown on right mount on tubular frame

4

Position strut tower supports (8) on strut towers.

5

Position support (9) on the hood catch crossmember, as shown.

6

Attach supports (7) to vehicle.

To do this, position right support (7) on the right strut tower support (8) and support (9) as shown.
Position left support (7) on the left strut tower support (8) and on the hood catch crossmember as shown.

7

Position crossbar (3).

Carefully position crossbar (3).
Damage may occur otherwise.

To do this, loosen thumb screw of the crossbar (3).
Insert threaded rods of the mounts (4) into the grooves of the supports (7) and fit crossbar (3).
Attach the knurls (6) of the mounts (4) but do not tighten.

Attach/detach engine support fixture

D08.10-A002-79

Shown on left mount on tubular frame

Attach/detach engine support fixture

D08.10-A003-79

Shown on right mount on tubular frame

8.1

When mounting the left engine support fixture on the tubular frame
Attach tensioning strap (10) to the tubular frame as shown.

Commercially available devices/tools
Tensioning strap

8.2

When mounting the right engine support fixture on the tubular frame
Attach suitable shackle (11) to the right mounting eye of the tubular frame.

9.1

When mounting the left engine support fixture on the tubular frame
Fasten tensioning strap (10) to the crossbar (3) using a suitable shackle (11).

9.2

When mounting the right engine support fixture on the tubular frame
Fasten shackle (11) to the crossbar (3).

10

Tighten knurl (6) and thumb screw of the crossbar (3).

11.1

When mounting the left engine support fixture on the tubular frame
Slacken tensioning strap (10) somewhat.

Do not lift tubular frame.
Damage may occur otherwise.

To do so, turn the spindle (12).

11.2

When mounting the right engine support fixture on the tubular frame
Turn spindle (12).

Do not lift tubular frame.
Damage may occur otherwise.

The shackle (11) must be slackened slightly.

12

Removal of the engine support fixture in reverse order.