ar0752p1465gx

Remove/install intake air temperature sensor

Typ ar · temat 07.52 · wersja 0102 · 2019-12-20

Dotyczy: Engine 642 in model 461

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 1 Silnik › 07 Przygotowanie mieszanki › 07.52 Benzynowy układ wtryskowy i zapłonowy PMS — Seria 461

EinPAS 15 Silnik › 15.30 Ssanie powietrza/ doładowanie › 15.30.12 Czujnik/ przełącznik/ wiązka przewodów — Seria 461

Dotyczy też silników/skrzyń biegów: 642 ***

AR07.52-P-1465GX

Remove/install intake air temperature sensor

04.12.2019

Engine

642 in model 461

Remove/install intake air temperature sensor

Shown on engine 642.975

1

Engine air intake duct downstream of air filter

2

Electrical connector

3

Air cleaner housing

B2/5

Hot film mass air flow sensor

P07.52-2028-11

Warning

Risk of injury. Skin or eye injuries may result when handling hot or glowing objects.

Wear protective gloves, protective clothing and safety glasses, if necessary.

AS00.00-Z-0002-01A

Topical note

Information on preventing damage to electronic components due to electrostatic discharge

AH54.00-P-0001-01A

Topical note

Notes on avoiding damage through contamination and foreign objects

AH00.00-P-5000-01A

Remove/install

1

Remove engine air intake duct downstream of air filter (1).

Engine 642 in model 461

Engine 642.884 in model 461.305/333/340/343/392
Engine 642.975 in model 461.304/334/339/344/346

AR09.10-P-8130GX

2

Release and disconnect electrical connector (2) from the hot film mass air flow sensor (B2/5).

3

Remove screws from the hot film mass air flow sensor (B2/5).

4

Remove hot film mass air flow sensor (B2/5) and cover opening with a clean, lint-free rag.

Installation: Replace seal.

The intake air temperature sensor (B17) is located in the hot film mass air flow sensor (B2/5).

5

Install in the reverse order.

6

Read out and delete fault memory.

AD00.00-P-2000-04A

Warning

Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running.

Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts.

AS00.00-Z-0005-01A

7

Perform engine test run. While doing so, check engine for proper operation and leak tightness.

Powiązane dokumenty