Removing and installing boost pressure control vacuum transducer

Typ ar · temat 07.17 · wersja 0100 · 1999-01-18

Dotyczy: ENGINE 611.980 in MODEL 638.094 /194 /294 with CODE (MQ4) Engine OM611 DE22 LA (75 kW) with CODE (MQ5) Engine OM611 DE22 LA (90 kW) ENGINE 611.980 in MODEL 638.094 /194 with CODE (MQ3) Engine OM611 DE22 A (60 kW)

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 1 Silnik › 07 Przygotowanie mieszanki › 07.17 Przetwornik ciśnienia, regulator ciśnienia — Seria 611 (modele 980) · Seria 638 (modele 094, 194, 294)

EinPAS 15 Silnik › 15.30 Ssanie powietrza/ doładowanie › 15.30.31 Siłownik/ nastawnik/ cylinder — Seria 611 (modele 980) · Seria 638 (modele 094, 194, 294)

AR07.17-S-7002B

Removing and installing boost pressure control vacuum transducer

7.10.98

ENGINE 611.980 in MODEL 638.094 /194 /294
with CODE (MQ4) Engine OM611 DE22 LA (75 kW)
with CODE (MQ5) Engine OM611 DE22 LA (90 kW)

ENGINE 611.980 in MODEL 638.094 /194 with CODE (MQ3) Engine OM611 DE22 A (60 kW)

Removing and installing boost pressure control vacuum transducer

S07.17-2502-06

1 Connection for hose (atmosphere)

2 Connection for vacuum hose (outlet)

3 Connection for vacuum hose (inlet)

Y80 Charge pressure control vacuum transducer

Y80.1 Connector

 	Removing, installing
1	Unplug connector (Y80.1) at charge pressure control vacuum transducer (Y80)
2	Detach hoses (1, 2, 3) at charge pressure control vacuum transducer (Y80)	 Pay attention to installation position
3	Detach charge pressure control vacuum transducer (Y80) at bracket
4	Install in the reverse order