ar0717s1450a

Removing and installing diaphragm pressure regulator

Typ ar · temat 07.17 · wersja 0102 · 1997-12-03

Dotyczy: ENGINE 111 in MODEL 638

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 1 Silnik › 07 Przygotowanie mieszanki › 07.17 Przetwornik ciśnienia, regulator ciśnienia — Seria 638

EinPAS 15 Silnik › 15.45 Sterowanie pracą silnika › 15.45.31 Siłownik/ nastawnik/ regulator mieszanki — Seria 638

Dotyczy też silników/skrzyń biegów: 111 ***

AR07.17-S-1450A

Removing and installing diaphragm pressure regulator

7.3.95

ENGINE 111 in MODEL 638

Removing and installing diaphragm pressure regulator

S07.52-3002-11

1 Safety ring

2 Diaphragm damper

3 Retainer

4 Retainer

5 Vacuum pipe

Removing and installing

Danger!

Risk of explosion from ignition. Risk of poisoning from inhaling and swallowing fuel. Risk of injury as a result of fuel coming into contact with skin and eyes.

No fire, naked flame or smoking.

Pour fuels only into suitable and appropriately marked containers.

Wear protective clothing when handling fuel.

AS47.00-Z-0001-01A

1

Disconnect the vacuum pipe (5)

2

Remove the safety ring (1)

3

Take the diaphragm damper (2) out of the fuel distributor

With the aid of a screwdriver, raise the diaphragm damper slightly.
Installation: Replace and grease the retainers (3) and (4) with oil.

4

The installation is carried out in reverse order

5

Test leaktightness

Powiązane dokumenty