ar0717p1060ff

Remove/install pressure control valve

Typ ar · temat 07.17 · wersja 0101 · 2019-05-08

Dotyczy: Engine 639.939 in model 454.0

Niedostępne w języku „pl”; wyświetlono w języku Angielski.

Umiejscowienie

Grupa funkcyjna 1 Silnik › 07 Przygotowanie mieszanki › 07.17 Przetwornik ciśnienia, regulator ciśnienia — Seria 454 (modele 0**) · Seria 639 (modele 939)

EinPAS 15 Silnik › 15.45 Sterowanie pracą silnika › 15.45.13 Przewód sztywny/elastyczny/zawór — Seria 454 (modele 0**) · Seria 639 (modele 939)

AR07.17-P-1060FF

Remove/install pressure control valve

23.04.2019

Engine

639.939 in model 454.0

Remove/install pressure control valve

P07.16-2678-08

1

High pressure pipe

4

Connector

6

Union nut

2

Connector

5

Cable duct

Y74

Pressure regulator valve

3

Connector

Remove/install

Danger

Risk of explosion caused by fuel igniting, risk of poisoning caused by inhaling and swallowing fuel as well as risk of injury to eyes and skin caused by contactwith fuel.

No fires, sparks, open flames or smoking. Pour fuels into suitable and appropriately marked containers only.
Wear protective clothing when handling fuel.

AS47.00-Z-0001-01A

Danger

Risk of explosion caused by fuel igniting. Risk of injury to skin and eyes caused by fuel spraying out at high pressure

Keep all ignition sources out of hazard area.
Do not carry out any work on system when it is pressurized.

AS07.16-Z-0001-01A

1

Remove water collector

AR83.25-P-1402FF

2

Remove vacuum reservoir

AR07.09-P-0001FF

3

Detach plugs (2, 3, 4)

4

Remove high-pressure line (1)

Notes about Common-Rail components

AH07.16-P-0002-01TX

Installation: Replace high-pressure line (1).

Bolt, pressure line bracket to cylinder head cover

*BA07.16-P-1001-01G

Nut, pressure line on high pressure pump

*BA07.16-P-1003-01G

Nut, pressure line to rail

*BA07.16-P-1004-01G

5

Remove screws of the cable duct (5)

The cable duct (5) is fastened with three screws.

6

Remove union nut (6) of the pressure regulating valve (Y74) and remove pressure regulating valve (Y74) with sealing ring

Notes about Common-Rail components

AH07.16-P-0002-01TX

Installation: Install new sealing ring of the pressure regulating valve (Y74).

Pressure regulator valve on rail

*BA07.16-P-1009-01G

7

Install in the reverse order

Warning

Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running.

Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts.

AS00.00-Z-0005-01A

8

Perform engine test run and check leak tightness of the fuel system in the area of the pressure regulating valve (Y74)

9

Read out fault memory

STAR DIAGNOSIS diagnosis system

AD00.00-P-2000-04FF

Common rail diesel injection (CDI)

Number

Designation

Engine 639.9

BA07.16-P-1001-01G

Bolt, pressure line bracket to cylinder head cover

Nm

12

Common rail diesel injection (CDI)

Number

Designation

Engine 639.9

BA07.16-P-1003-01G

Nut, pressure line on high pressure pump

Nm

22

Common rail diesel injection (CDI)

Number

Designation

Engine 639.9

BA07.16-P-1004-01G

Nut, pressure line to rail

Stage 1

Nm

20

Stage 2

°

60

Common rail diesel injection (CDI)

Number

Designation

Engine 639.9

BA07.16-P-1009-01G

Pressure regulator valve on rail

Nm

27

Powiązane dokumenty